Mobility combined with power is the strength of this wheeled paver. Large rear tires provide maneouvrability, as does a tight turning radius. Intuitive conventional electronics enable easy operation for the experienced and newcomers. The high operator platform provides exceptional visibility, while a swiveling seat and an adjustable dashboard ensure great sight lines and comfort. The impact of dump trucks is lessened through a low hopper dump height and oscillating push rollers.
- National roads
- Country roads
- City/municipal streets
- Building lots
- Large squares and courtyards
Material Feeding System
The twin conveyor system ensures material flows consistently from the hopper, so productivity and quality goals can be achieved.
Wide material tunnel to optimise flow and limit segregation
Consistent auger distribution of material across the screed is essential to placing a quality mat with minimal segregation.
The hopper is designed to reduce spilling during connections between the paver and the lorries. It is also designed to maximise flow and minimise segregation.
The result: improved quality in the form of smoother mats.
Engine, undercarriage key components
A Cummins QSB 6.7 litre, water-cooled engine is the power inside the Ammann AFT 600-2, AFW 600-2, AFT 700-2 and AFW 700-2. The engine drives an efficient hydraulic system, with power transfer through a split gearbox.
Wheels provide manoeuvrability that’s useful when paving in tighter spaces. The wheeled pavers also offer good production when working in open areas. The hydrostatic drive system offers smooth movement. Hydrostatic brakes ensure secure and smooth control while driving and a multidisk brake secures the machine in park mode.
The high stability of the Ammann screeds is due to the 4-Tube principle design. These four tubes allow wide working widths without the need of any supporting rods. This makes the setup of the screed easier and saves time when preparing the paver for large working widths.
Ammann screeds feature gas (LPG) or electric heating systems, leaving the choice of the preferred system up to the customer. Electric heated screeds feature high quality insulations and powerful generator to reduce heat-up times. Well designed heating coils for the bottom plates and tampers grant a well distributed heat over the full length of the screed. Gas heated screeds feature a fast heat-up time that reach target temperatures quickly.
|Simple side shield control
|Weight & Dimensions|
|A – Length (Machine)||6380 mm|
|B – Length (Transport)||6100 mm|
|C – Length (Axle)||2240 mm|
|D – Length (Material hopper)||2125 mm|
|E – Height (Machine)||3900 mm|
|F – Height (Transport)||3100 mm|
|G – Height (w.o. Canopy)||2845 mm|
|H – Height (material loading)||495 mm|
|I – Width (Machine, open hoppers)||3250 mm|
|J – Width (Transport)||2550 mm|
|K- Width (Wheel gauge)||2055 mm|
|L – Max. approach angle||17° (front) / 16° (back)|
|Capacity & Performance|
|Placement thickness (max)||-150 up to +310 mm|
|Theoretical paving capacity||650 t/h|
|Paving speed||30 m/min|
|Transport speed||15 km/h|
|Material Feeding System|
|Hopper dumping height center (w. hopper flap)||574 mm|
|Hopper width, internal||3142 mm|
|Conveyor type||Dual bar feeder|
|Conveyor width||2×580 mm|
|Conveyor control||Automatic with limit switches|
|Auger diameter||380 mm|
|Auger control||Automatic with ultrasonic sensors|
|Auger height adjustment||250 mm|
|Operator console||Slidable left/right|
|Engine model||Cummins QSB 6.7 – C173|
|Rated power KW @ 2200 rpm||110|
|Emissions||Stage IIIA (T3)|
|Electrical system||24 V|
|Fuel tank capacity||315 l|
|Front wheel drive||–|
|Final drive||Hydrostatic direct drives comprised of planetary gear units and hydraulic motors|
|Screed||Heating System||Screed Type||Standard working width||Max. with mechanical extensions|
|STV 5100 G||Gas (LPG)||Tamper & vibration screed||2550–5100 mm||6600 mm|