ARX 90 Tier 4f

  • Photos

  • Videos

  • Virtual Tour

The Ammann ARX 90 T4f Tandem Roller provides features and benefits that ultimately lead to added value for owners of the heavy compactor. It also meets Tier 4f emissions standards.

Compaction output is high and the system efficient. Each drum has an independent vibratory pump. The roller also features a heavy-duty, two-stage vibrator and easy adjustment of amplitude and frequency.

A single-drive pump makes for easy service and maintenance. The cab’s design provides comfort that helps the operator stay focused and productive throughout the shift.

A differential lock is standard, while the optional ACEforce system provides a host of benefits including measurement and documentation, evaluation of material stiffness, operator guidance.

  • Highlights

  • Specifications

  • Options

Open All


  • An independent vibratory pump for each drum
  • Heavy-duty, 2-stage vibrator
  • Simple adjustment of amplitude/frequency
  • Combination version available
  • Chip spreader for project flexibility
  • Single-drive pump
  • Differential lock
  • Articulated steering
  • Articulating oscillation joint
  • Spacious, comfortable and quiet cab
  • Excellent visibility to drum surfaces, edges and spraying bars
  • Rotating and sliding seat
  • Multifunctional display in steering wheel
  • Tiltable and adjustable steering column
  • Control switches on armrest
  • On-board diagnostics
  • Easy access to all service points


Dimensions Metric US
A = Machine length 4720 mm 185.9 in
B = Wheelbase 3500 mm 137.8 in
C = Machine height 3000 mm 118.2 in
E = Drum width 1680 mm 66.2 in
F = Machine width 1800 mm 70.9 in
H = Ground clearance 300 mm 11.8 in
I = Drum diameter 1220 mm 48.1 in
J = Drum shell thickness 22 mm 0.9 in
Operating weight CECE 9560 kg 21080 Ib
Operating weight max. 11010 kg 24270 Ib
Static linear load 28.4/28.5 kg/cm 159/159.6 lb/in
VT classification
Drum offset max. 170 mm 6.7 in
Producer DEUTZ
Type TCD 3.6 L4
Emission stage EU Stage IV, U.S. EPA Tier 4 Final
Output according to ISO 14396 74.4 kW 100 HP
No. of speeds
Max. working speed 7 km/h
Max. transport speed 10,5 km/h 6.5 MPH
Theoretical gradeability 25/30 %
Turning radius inside 5470 mm 215.4 in
Steering and oscillating angle 31/6 ± °
Amplitudes 0,34/0,7 mm 0.013 / 0.028 in
Amplitudes ACE
Frequencies 42/54 Hz 2520/3240 VPM
Frequencies ACE
Centrifugal forces 68/84 kN
Centrifugal forces ACE
Fuel 220 l 58.1 gal
Sprinkling water tanks capacity 840 l 221.9gal
Emulsion sprinkling (for Kombi version only) 24 l


  • CE conformity
  • Engine Deutz complying EU Stage 4/EPA Tier 4f
  • Open platform with ROPS canopy
  • 170° rotating and sliding working station with multifunctional display
  • Two stage vibration system (2 frequencies / 2 amplitudes)
  • Working lights 2 front, 2 rear
  • Smooth drum with vulcolan scrapers
  • Electronic idle control


  • Air Condition
  • ACEforce (CCC System)
  • GPS mapping for ACE systems
  • Telematics-ready
  • Pneu-tire axle with emulsion sprinkling and Thermal aprons
  • Chip spreader Ammann
  • Edge cutter
  • Oscillation

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.