ABM 90-140 EASYBATCH

  • 照片

  • 视频

ABM 90-140 EasyBatch以其高机动性能增强了该间歇式搅拌站的灵活性。事实上,ABM 90-140 EasyBatch每次搬迁时,最多只需两天时间即可投产。

成套独立的搅拌站适合拖车装运,安装时无需使用起重机。该设备是一年需多次搬迁的理想设备,特别适合基础设施欠发达地区的高可靠性生产工作。其运输宽度为3 m,运输高度4.25 m,运输十分方便。

  • 亮点

  • 技术规格书

打开所有

概述

  • 输出能力为90 t/h~140 t/h
  • 搬迁和安装极其方便
  • 出厂前已预安装和试验
  • 结构紧凑,占地面积小,运输方便,最大宽度只有3 m
  • 无需混凝土基础
  • 安装时无需起重机
  • 可根据具体应用定制多种方案,特别适用于偏远地方的频繁使用
Plant type 90 140
Number of cold feeders 2 + 2 4 (Option: + 1)
Content cold feeders Total 24 m³ Total: 26 m³
Type drying drum T 1650 T 1770 S
Diameter / length 1.41  / 1.65 m / 6.5 m 1.7 m / 7 m
Drum drive 4 × 4 kW 4 × 7.5 kW
Max. drying capacity at 3 % moisture 90 t/h 140 t/h
Max. drying capacity at 5 % moisture 76 t/h 120 t/h
Burner power output 6.5 MW 10 MW
Fuels Natural gas, fuel oil extra light, heavy oil
Filter capacity 18 000 Nm³/h 28 000 Nm³/h
Filter surface 330 m2 413 m2
Type screen VA 1440 VA 1536
Screening 4 - fraction incl. Bypass 4-fraction (Option 5-fraction)
Screen surface 10.5 m2 15.8 m2
Number of screen decks 2 ( horizontal screen ) 4 (+ 1 option)
Hot aggregate silo 1-row 10 t 15 t (4 comparments / Option: 5 compartments)
Aggregate scale 1760 kg 2560 kg
Filler scale Included in aggregate scale Option: seperate filler scale 200 kg
Bitumen scale Volumetric or optional coriolis massflow system
Mixer size 1.2 t 1.7 t
Continual plant capacity * 90 t/h 140 t/h
Binding agent supply 1 bitumen tank 25 m³ Optional
Filler supply Optional Optional
Hot mix storage silo / compartments Direct loading
Option: lateral 57 t – 120 t in 1 c. or 76 t in 2 c.
Direct loading
Option: lateral 57 t – 120 t in 1 c. or 76 t in 2 c.
Recycling addition up to 30 % Optional Cold recycling addition (RAC) directly into the mixer
Transport dimensions without truck
(length × width × height)
Trailer 1: 19.95 × 3 × 4.48 m
Trailer 2: 15.8 × 3 × 4.48 m
Trailer 1: 21.5 × 3 × 4.3 m
Trailer 2: 16.5 × 3 × 4.3 m
Options Bitumen tanks
Filler silo
Coriolis flow counter for the bitumen feed
Additional feeder
Five split screening
Bitumen foam generator
Bitumen tanks
Filler silo
Coriolis flow counter for the bitumen feed
Filler weighing scale
Diesel fuel tank
* Hot mix production capacity based on following conditions: 10 % bitumen and filler addition, input moisture of aggregates 3 %, aggregate temperature increase 175 K and 0 / 2 fraction share max. 40 % | Mixing cycles 80 per hour.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close