-
Photos
-
Virtual Tour
The AFW 500 excels on medium to large jobs requiring good manoeuvrability and high performance and productivity.
Exceptional weight distribution makes the AFW 500 easy to handle, while the maximum paving width of 6.5 metres makes it a good fit for a wide range of applications.
The machine is available with two, four- or six-wheel drive, providing traction on difficult surfaces. The paver features two working speeds and two travel speeds, enabling quick movement from one end of the jobsite to another.
-
Highlights
-
Specifications
-
Options
OVERVIEW
- Paving width range of 2550 mm to 6500 mm
- Two working and two travel speeds
- Two independently driven, reversible conveyors
- Electric and gas screed heating systems available
- Electrohydraulic auger height adjustment
- Electrohydraulic roof lowering system
- Excellent operator visibility
- Low discharge height for easy material loading
OPERATOR-FRIENDLY DASHBOARD
 |
Operation of the machine is kept simple with the new dashboard and screed control panel, created specifically for the AFW 500. The panel is simple to understand and operate, yet provides advantages such as lit buttons for optimal visibility when working at night. Individual control unit parts allow economical replacement.
A central 5” color display provides the operator with key information regarding the ongoing paving process. The display also enables simple troubleshooting. A standard CAN bus connection between the individual control units makes replacement easy and allows for reprogramming as needed. |
EXCELLENT VISIBILITY
 |
The paver design, sliding seat and dashboard enable the operator to see all phases of the paving process, which improves productivity, quality and safety. |
LEVELING SYSTEM CHOICES
 |
The control unit allows the installation of any common leveling system- the choice is up to the customer. The installation plug is pre-mounted and allows for quick connection to the leveling sensors and controls. |
LOW DISCHARGE HEIGHTS
 |
Lower height reduces material spillage that can cause mat defects. Hopper height also matches trucks of varied sizes, increasing fleet utilisation and making it easier to find outside haulers with appropriately sized vehicles. |
| AFW 500 WHEELED ASPHALT PAVER | |
|---|---|
| WEIGHT & DIMENSIONS | |
| OPERATING WEIGHT | 15 000 kg |
| WITH 6.5 M SCREED | 16 500 kg |
| A = MACHINE LENGTH | 6100 mm |
| B = TRANSPORT LENGTH | 5860 mm |
| C = AXLE LENGTH | 1922 mm |
| D = MACHINE HEIGHT | 3520 mm |
| E = TRANSPORT HEIGHT | 3100 mm |
| F = HEIGHT WITHOUT CANOPY | 3000 mm |
| G = MACHINE WIDTH | 3240 mm |
| H = TRANSPORT WIDTH | 2550 mm |
| I = WHEEL GAUGE | 2076 mm |
| J = MATERIAL LOADING HEIGHT | 600 mm |
| K = HOPPER LENGTH | 2000 mm |
| ENGINE & DRIVETRAIN | |
| MANUFACTURER | Cummins |
| TYPE | QSB 4.5 |
| ENGINE COOLING SYSTEM | Liquid cooling |
| NUMBER OF CYLINDERS | 4 |
| RATED POWER | 119 kW |
| EMISSIONS | EU Stage IIIA / U.S. EPA Tier 3 |
| TYRES | 17,5–R25 |
| DIRECTIONAL WHEELS | 530 × 300 |
| TRANSMISSION TYPE | Hydrostatic |
| STEERING TYPE | Hydraulic |
| INTERNAL TURNING RADIUS | 3.30 m |
| PERFORMANCE | |
| MAX. THEORETICAL PAVING CAPACITY | 500 t/h |
| MAT THICKNESS | 10–300 mm |
| SPEED (TRANSFER) | 0–10 km/h |
| SPEED (PAVING) | 0–37 m/min |
| MATERIAL FEEDING | |
| HOPPER CAPACITY | 12 t |
| CONVEYOR SYSTEM | Two independent, reversible |
| CONVEYOR WIDTH | 2 × 585 mm |
| CONVEYOR SPEED | 29.3 m/min |
| AUGER SYSTEM | Two independent, reversible |
| AUGER DIAMETER | 360 mm |
| AUGER SPEED | 82 rpm |
| AUGER HEIGHT ADJUSTMENT | 150 mm |
| TANK CAPACITIES | |
| FUEL | 220 l |
| COOLING SYSTEM (TOTAL) | 22 l |
| ENGINE OIL | 11.5 l |
| HYDRAULIC OIL | 170 l |
| EMULSION SPRAY | 30 l |
| SCREED FST 500 G/E | |
|---|---|
| STANDARD PAVING WIDTH | 2550–4900 mm |
| MAX. W / EXTENSIONS | 6500 mm |
| MIN. W / REDUCTION PLATES | 1500 mm |
| CROWN RANGE | -2.5% to +4.0% |
| SCREED TYPE | Tamper + Vibration |
| HEATING | Gas / Electric |
STANDARD EQUIPMENT
- Rear wheel drive for AFW 500
- Automatic heating control
- Electro-hydraulically adjustable augers height
- Proportional ultrasonic augers control
- The ISR system (Screed Assist)
- Hydraulic folding canopy
OPTIONAL EQUIPMENT
- 4 wheel drive (DT) for AFW 500 E/G
- 6 wheel drive (DTI) for AFW 500 E/G
- Longitudinal levelling system
- Slope control system
- Reduction plates at 1500 mm paving width
- Mechanical extensions 2×800 mm
- Rotating screed side-end plates
- Automatic central lubrication system
