AV 110 X TIER 3

  • Photos

A unique propulsion system powers the Ammann AV 110 X Tier 3 roller, helping it efficiently deliver the weight and vibration necessary to achieve optimum compaction results.

Key to the propulsion system is location of the power train in the rear frame. In addition, independent pumps for drive and vibration provide optimal traction and compaction force. A combination of drum dimensions, frequencies and amplitudes also help deliver optimum compaction results.

The roller has two frames connected by a double joint that enables crab steering on each side. The crab steering provides increased compaction output and responsiveness, crucial on any jobsite.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • ACEforce compaction control system
  • Integrated ROPS
  • Excellent view to drum surface, edges and sprinkling system
  • Rotating/sliding seat
  • 2 drive levers for easy operation
  • Cabin isolated from heat and vibration
  • 2 amplitudes and frequencies
  • Balanced drum dimensions
  • Reliable, long-life vibration system
  • Large water tanks
  • Independent, double-pump system drum drives
  • Excellent traction, even in difficult terrain
  • Double joint enables crab steering
  • Steering angle and compact design for manoeuvrability
  • Convenient access to service points and fluid ports

av_110_x_tandem_roller_cad_drawing_2880x1620px_bw

Dimensions Metric
A = Machine length 4760 mm
B = Wheelbase 3460 mm
C = Machine height 3020 mm
D = Machine height (removed CAB / ROPS) 2350 mm
E = Drum width 1700 mm
F = Machine width 1822 mm
H = Ground clearance 760 mm
I = Drum diameter 1300 mm
J = Drum shell thickness 22 mm
Specifications
Operating weight maximum 11190 kg
Compacting width 1700 mm
Drum offset 160 mm
Weights
Operating weight (CECE) 10 400 kg
Front drum load (CECE) 5250 kg
Rear drum load (CECE) 5150 kg
Front drum linear load 30,9 kg/cm
Rear drum linear load 30,3 kg/cm
Steering
Steering angle (+ -) 34 °
Oscillation angle (+ -) 6 °
Turning radius inner (edge) 4650 mm
Transversal stability – straight 30 °
Riding characteristic
Maximal speed 11 km/h
Gradeability without vibration 30 %
Gradeability with vibration 30 %
Brakes
Operation Hydrostatic
Parking Multidisc
Emergency Multidisc
Vibration
Amplitudes 0,7/0,35 mm
Frequencies 45/55 Hz
Centrifugal forces 110/83 kN
Watering
Watering Pressure
No. of pumps 2
Water filtration stages 3
Capacities
Fuel 208 lt
Water 1000 lt
Electrical Installation
Voltage 12 V
Capacity of batteries 135 Ah
Engine
Make Cummins
Type QSB3.3-C99
Rated power 74 kW
Standard ISO 3046/1 (DIN6271)
STANDARD EQUIPMENT
  • Engine Cummins complying EU Stage III / EPA Tier 3
  • Open driver’s platform with railing and protection against vandalism
  • Two amplitudes and two frequencies
  • Hydrostatic drive front and rear drums
  • Rotating and sliding operator’s station
  • Adjustable seat and steering column
  • Pressurized sprinkling system
  • Working lights front and rear
  • Scrapers
  • Inter-axle differential lock
OPTIONAL EQUIPMENT
  • CE conformity kit
  • ROPS cab ventilated and heated
  • ROPS protection frame on driver’s platform
  • Sun canopy for open platform version
  • Air conditioning
  • Radio
  • Edge cutter
  • IR Thermometer
  • Additional working headlights
  • ACEforce (CCC System)

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close