APH 50/75

  • Photos

  • Videos

  • Virtual Tour

A trusted compactor

The Ammann APH 50/75 Hydrostatic Vibratory Plate features a two-shaft exciter system that assures powerful compaction forces. This machine is highly reliable and trusted in the marketplace because of its robust design and long component life. APH 50/75 is the smallest machine within the APH range and weighs in at 367 kg. It can be operated easily and comfortably, even in tight areas, and works well around obstacles such as columns and in cohesive materials.

Biofuel Use

Ammann diesel-burning machines are able to utilise hydrotreated vegetable oil (HVO), a biofuel made from waste that reduces CO2 emissions by up to 90%.

  • Highlights

  • Specifications

  • Technology

Open All

Low Hand-Arm-Vibration Values (HAV) to the Operator

The standard hand guide for APH plates is isolated to minimise hand-arm vibration. Levels lower than 2.5 m/s² (excluding APH 100-20) enable operators to work longer shifts with the best comfort. The vibration levels are so low that safety codes do not require documentation of operator hours.

Ammann Orbitrol Steering

Ammann Orbitrol steering controls the adjustment of the centrifugal weights, allowing a smooth and easy change of direction while ensuring great accuracy on the jobsite. Machine speed and direction can be adjusted by a simple turn of the steering control lever. The machine also can hover and provide on-the-spot compaction for the more challenging areas. This system also helps improve productivity in corners and other tight spots.

Fully Hydrostatic Drive

A fully hydrostatic drive system eliminates the need for a V belt and a centrifugal clutch – and the maintenance that go with them. A hydraulic motor drives the eccentric shafts.

ACE Compaction Expert – Big technology in a Small Package

APH Hydrostatic Vibratory Plates can be equipped with the industry-proven Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the same technology that has been used on Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved.
Weights & Dimensions
Machine weight basic unit 350 kg
A Base plate length 450 mm
B Machine length 900 mm
C    with handle 1600 mm
D Machine heigth 820 mm
E Handle height (work) 1000 mm
F Handle height (transport) 1500 mm
G Machine width 600/750 mm
Engine
Engine Hatz Supra 1D50S
Fuel Diesel
Engine Output 9.5 HP / 7 kW
    at RPM 3200 rpm
Fuel consumption 1.7 l/h
Compaction Forces
Max. Vibration frequency 70 Hz
Max. Centrifugal force 50 kN
Working surface basic unit 1125 m²/h
Max Surface Pressure 18.52 N/cm²
Miscellaneous
Operating Speed 25 m/min
Tank capacity 5 l
Gradeability 36%
Max. incline to all sides 30°
Options
Extension Plates 75 mm / 150 mm
Operation hour meter x
Electric starter x
Emergency stop x
ACE econ x
ACE force
Working lights

This machine is equipped with ServiceLink.

READ MORE