ARP 75C

  • Photos

A WINNING COMBINATION

The ARP 75C is a combination roller that utilises a drum in the rear and four tyres in the front. The vibrating drum is as standard equipped with multiple range of frequencies which provide variable compactor output. The tyres, meanwhile, provide a kneading effect that is helpful on certain types of asphalt mixes and temperatures. The tyres also are exceptional at sealing joints. A new symmetrical cab with 360º visibility from the operator station establishes a new market standard.

Biofuel Use

Ammann diesel-burning machines are able to utilise hydrotreated vegetable oil (HVO), a biofuel made from waste that reduces CO2 emissions by up to 90%.

  • Highlights

  • Specifications

  • Options

Open All

PRODUCTIVITY

Pivot steering with split drums
Enables high manoeuvrability and reduces surface shear forces. A wide range of working widths provide productivity.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings

ERGONOMICS

Advanced machine controls
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
Uninhibited visibility
Excellent all-around machine visibility for jobsite safety

SERVICEABILITY

ECOdrop
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems

ARP 75C PIVOT-STEER TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final)
DIMENSIONS
A = MACHINE LENGTH 4100 mm
B = WHEELBASE 3000 mm
C = MACHINE HEIGHT 3000 mm
E = DRUM WIDTH 1500 mm
F = MACHINE WIDTH 1670 mm
G = CURB CLEARANCE 715 mm
H = GROUND CLEARANCE 240 mm
I = DRUM DIAMETER 1100 mm
J = DRUM THICKNESS 18 mm
WEIGHT & DRIVING CHARACTERISTIC
OPERATING WEIGHT CECE 7510 kg
STAT. LIN. LOAD 25 kg
TRAVEL SPEED 10 km/h
OSCILLATION ANGLE ± 6°
STEERING ANGLE ± 24°
TURNING RADIUS, INNER (EDGE) 2938 mm
DRUM OFFSET 1220 mm
ENGINE
MANUFACTURER Kubota V3307-CR-T
POWER OUTPUT ISO 14396 54.4 kW (74 HP)
EMISSION CLASS EU Stage V, U.S. EPA Tier 4 Final
EXHAUST GAS AFTER-TREATMENT EGR+DOC+DPF
COMPACTION FORCES
FREQUENCY I 38-48 Hz
FREQUENCY II 45-55 Hz
AMPLITUDE I 0,68 mm
AMPLITUDE II 0,39 mm
CENTRIFUGAL FORCE I 58-92 kN
CENTRIFUGAL FORCE II 47-70 kN
MISCELLANEOUS
FUEL TANK CAPACITY 180 liters
WATER TANK CAPACITY 900 liters
MAXIMUM RECOMMENDED COMPACTED LIFT THICKNESS AT OPTIMAL WORKING CONDITIONS
ROCKFILL N/A
SAND / GRAVEL 350 mm
MIXED SOILS 250 mm
SILT N/A
CLAY N/A
STABILISATION 180 mm
ASPHALT 40-130 mm
STANDARD
  • CE conformity
  • Cab version with integrated ROPS
  • Working lights on cab
  • 10” multi-control display with on-board diagnostics
  • 270° rotatable & slideable seat
  • FTS (Finger Tip Steering)
  • 2 smooth drums, multiple frequencies/ 2 amplitude vibratory system
  • Ammann color scheme
  • Tiltable scrapers
  • Central draining points
  • Test ports on hydro-components

 

OPTIONAL EQUIPMENT
  • Customer color scheme
  • Split double drums (Front ACEpro)
  • Split combi drums (Front ACEpro)
  • Biodegradable hydraulic oil
  • Additional Lights 360° LED
  • Additional Lights 360° LED for Combi
  • A/C
  • A/C without Cooling Medium
  • Radio Preparation
  • Radio
  • Sun Films on Cabin Glasses
  • Sun Visor
  • Warning Beacon LED
  • Warning Beacon Green LED
  • Back-up Alarm
  • Back-up Alarm Adaptive
  • Edge Cutter 45° (Front Right)
  • Edge Cutter 45° (Diagonal)
  • Edge Cutter 45° (Rear left)
  • Chip Spreader Preparation
  • Chip Spreader
  • Infrared Thermometer
  • Compaction Measuring System ACEforce
  • Telematics Preparation
  • Telematics Topcon
  • Telematics Trackunit
  • Telematics ServiceLink
  • GPS Q-Compaction Preparation
  • GPS Q-Compaction Preparation ACE
  • GPS Q-Compaction ACE
  • ADS (Ammann Documentation System)
  • ADS (Ammann Documentation System RTK
  • Rear View Camera
  • Rear View Camera for Chip Spreader
  • ROPS 2D
  • Water Tank Filling from Ground
  • Slow Moving Vehicle Triangle
  • Toolset
  • Fire Extinguisher
  • Cooling Box
  • Seat Belt 3”
  • Maintenance Kit 500h
  • Maintenance Kit 1000h
  • Maintenance Kit 2000h
  • Engine Automatic Stop
  • Steering Control
  • Battery Disconnection Switch
  • Registration Plate Holder
  • Container Shipment Preparation
  • Certificate of Origin
  • Additional Printed Documentation
  • Additional Lights Cabin LED