WORKING AROUND OBSTRUCTIONS
The Ammann ARX 23.1-2 Tandem Roller is a great fit for the rental market and contractors looking for a low-maintenance machine with an intuitive dashboard and controls.
The roller features a maintenance free articulation joint that enables quick drum adjustment from in-line to off-set configurations, helpful when working close to obstructions. The in-line drum setting is available when it’s time for productivity in open spaces. The roller utilises a Kubota engine that meets EU Stage V and U.S. EPA T4f emission standards.
Ammann diesel-burning machines are able to utilise hydrotreated vegetable oil (HVO), a biofuel made from waste that reduces CO2 emissions by up to 90%.
|Electronic drive lever
Advanced drive control enables smooth starts and stops during machine operation.
Articulation joint with oscillation
Great manoeuvrability and constant contact with the surface are key factors in achieving high quality compaction.
Multi-level filtration system with large water tank for extended intervals between fillings.
|Operator platform design
Spacious operator platform with comfortable driver´s seat.
Simple & convenient operation control
Dashboard with clear display and intuitive machine control.
Exceptional operator visibility
Perfect all-around machine visibility to maximise safety on the jobsite.
|Tool-free daily inspection
Quick and easy daily inspection.
Reduce time required for machine maintenance and prevent damage to components.
Service point locations
Service and regular maintenance points are quickly andreasily accessible.
|ARX 23.1-2 Tandem Roller (EU Stage V / U.S. EPA Tier 4f)|
|A = MACHINE LENGTH||2500 mm|
|B = WHEELBASE||1740 mm|
|C = MACHINE HEIGHT||2550 mm|
|D = MACHINE HEIGHT (FOLDED ROPS)||1935 mm|
|E = DRUM WIDTH||1000 mm|
|F = WORKING WIDTH WITH OFFSET||1040 mm|
|G = MACHINE LENGTH (FOLDED ROPS)||2585 mm|
|H = GROUND CLEARANCE||280 mm|
|H1 = SIDE CLEARANCE||490 mm|
|I = DRUM DIAMETER||695 mm|
|J = DRUM SHELL THICKNESS||13 mm|
|K = MACHINE WIDTH (TOTAL)||1130 mm|
|WEIGHT AND OPERATING CHARACTERISTICS|
|OPERATING WEIGHT CECE||2260 kg|
|OPERATING WEIGHT MAX.||2495 kg|
|STAT. LIN. LOAD OF FRONT DRUM||10.7 kg/cm|
|STAT. LIN. LOAD OF REAR DRUM||10,9 kg/cm|
|TURNING RADIUS INSIDE||2630 mm|
|STEERING / OSCILLATING ANGLE||30/6.5 ±°|
|DRUM OFFSET||40 mm|
|ENGINE TYPE||Kubota D1703-M-DI|
|EMMISSION CLASS||EU Stage V / U.S. EPA Tier 4 Final|
|POWER OUTPUT ISO 3046||18.5 kW (24.8 HP)|
|CYLINDER / LTR.||3 cyl / 1826 cm³|
|NOMINAL SPEED||2100 / 2400 rpm|
|TRAVEL SPEED||10 km/h|
|GRADEABILITY WITH / WITHOUT VIBR.||25% / 30%|
|AMPLITUDE I||0.5 mm|
|AMPLITUDE II||0.5 mm|
|FREQUENCY I||58 Hz|
|FREQUENCY II||66 Hz|
|CENTRIFUGAL FORCE I||31.4 kN|
|CENTRIFUGAL FORCE II||36.9 kN|
|BATTERY / CAPACITY||12/77 V/Ah|
|WATER TANK||190 l|
|HYDRAULIC TANK||28.5 l|
|DIESEL FUEL TANK||35 l|
- Front and rear vibration & drive
- Pressurised pulse interval sprinkler system
- 2 working frequencies
- Control system with emergency stop
- Ammann Vibration Control
- Lateral sliding seat
- Hydraulic test ports
- Off-set into In-line drum setting
- Battery disconnection switch
- On-board diagnostics
- Front/rear rubber bumpers
- CE-kit with folding ROPS and working lights
- Road lights
- Infrared thermometer
- ATC – Ammann Traction Control
- Reverse alarm
- Additional working lights (ROPS mounted)
- Warning beacon
- Second drive-lever, left
- Arm rests
- Edge-cutter inc. Multi-function lever
- Scrapers tiltable
- Bio-degradable hydraulic oil
- Central lifting point
- Customer color
- Wheather canopy