APH 85/95

  • Photos

  • Videos

  • Virtual Tour

A heavy hitter

The weight of the APH 85/95 combines with the industry-leading triple-shaft exciter system to provide performance, climbing ability and responsiveness.

APH 85/95 is available with a diesel or a petrol version. Several options, such as extension plates, and operation hour meter allow for customisation to make the plate fit your particular needs. The optional ACEforce compaction measuring system is another key tool many contractors utilise in efforts to achieve thorough, efficient compaction results.

  • Highlights

  • Specifications

  • Technology

Open All

Ammann Triple-Shaft Exciter System

Ammann is the technological leader in plate compaction with its patented triple-shaft exciter system. The system keeps plate movement consistent, which in turn enables smooth travel – even through heavy, cohesive soils – and helps effortlessly overcome steep grades. APH machines are impressive climbers and can even do so while backfilling saturated areas – work that can leave competitive products at a standstill.

Low Hand-Arm-Vibration Values (HAV) to the Operator

The standard hand guide for APH plates is isolated to minimise hand-arm vibration. Levels lower than 2.5 m/s² (excluding APH 100-20) enable operators to work longer shifts with the best comfort. The vibration levels are so low that safety codes do not require documentation of operator hours.

Ammann Orbitrol Steering

Ammann Orbitrol steering controls the adjustment of the centrifugal weights, allowing a smooth and easy change of direction while ensuring great accuracy on the jobsite. Machine speed and direction can be adjusted by a simple turn of the steering control lever. The machine also can hover and provide on-the-spot compaction for the more challenging areas. This system also helps improve productivity in corners and other tight spots.

Fully Hydrostatic Drive

A fully hydrostatic drive system eliminates the need for a V belt and a centrifugal clutch – and the maintenance that go with them. A hydraulic motor drives the eccentric shafts.

ACE Compaction Expert – Big technology in a Small Package

APH Hydrostatic Vibratory Plates can be equipped with the industry-proven Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the same technology that has been used on Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved.
APH 85/95 Diesel
Weights & Dimensions Metric US
Machine weight basic unit 760 kg 760 kg  (1676 lb)
A Base plate length 520 mm 520 mm (20.5 in)
B Machine length 1070 mm 1070 mm (42.1 in)
C    with handle 1965 mm 1965 mm (77.4 in)
D Machine heigth 910 mm 910 mm (35.8 in)
E Handle height (work) 1000 mm 1000 mm (39.4 in)
F Handle height (transport) 1500 mm 1500 mm (59.1 in)
G Machine width 650/800/950 mm 650/800/950 mm
(25.6/31.5/37.4 in)
Engine
Engine Kubota D902 Kubota D902
Fuel Diesel Diesel
Engine Output 13.4 kW 13.4 kW
    at RPM 2600 rpm 2600 rpm
Fuel consumption 3.3 l/h 3.3 l/h (0.87 gal/h)
Compaction Forces
Max. Vibration frequency 52 Hz 52 Hz (3120 vpm)
Max. Centrifugal force 85 kN 85 kN (19109 lbf)
Working surface basic unit 24.8 m²/min 24.8 m²/min
Max Surface Pressure 20.4 N/cm² 20.4 N/cm²
Miscellaneous
Operating Speed 31 m/min 31 m/min (1.16 mph)
Tank capacity 10 l 10 l (2.6 gal)
Gradeability 36% 36%
Max. incline to all sides 30° 30°
Options
Extension Plates 75 mm / 150 mm 75 mm / 150 mm (3 in / 5.9 in)
Operation hour meter x x
Electric starter x x
Emergency stop x x
ACE econ x x
ACE force x x
Working lights

 

APH 85/95 Petrol
Weights & Dimensions Metric US
Machine weight basic unit 740 kg 740 kg (1631 lb)
A Base plate length 520 mm 520 mm (20.5 in)
B Machine length 1070 mm 1070 mm (42.1 in)
C    with handle 1965 mm 1965 mm (77.4 in)
D Machine heigth 910 mm 910 mm (35.8 in)
E Handle height (work) 1000 mm 1000 mm (39.4 in)
F Handle height (transport) 1500 mm 1500 mm (59.1 in)
G Machine width 650/800/950 mm 650/800/950 mm
(25.6/31.5/37.4 in)
Engine
Engine Briggs & Stratton V-Twin 5434 Briggs & Stratton V-Twin 5434
Fuel Petrol Petrol
Engine Output 17.8 kW 17.8 kW
    at RPM 2600 rpm 2600 rpm
Fuel consumption 3.5 l/h 3.5 l/h (0.92 gal/h)
Compaction Forces
Max. Vibration frequency 52 Hz 52 Hz (3120 vpm)
Max. Centrifugal force 85 kN 85 kN (19109 lbf)
Working surface basic unit 24.8 m²/min 24.8 m²/min
Max Surface Pressure 20.4 N/cm² 20.4 N/cm²
Miscellaneous
Operating Speed 29.5 m/min 29.5 m/min (1.1 mph)
Tank capacity 10 l 10 l (2.6 gal)
Gradeability 36% 36%
Max. incline to all sides 30° 30°
Options
Extension Plates 75 mm / 150 mm 75 mm / 150 mm (3 in / 5.9 in)
Operation hour meter x x
Electric starter x x
Emergency stop x x
ACE econ x x
ACE force x x
Working lights

This machine is equipped with ServiceLink.

READ MORE

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close