-
Photos
-
Virtual Tour
PUNCH AND PRECISION
Advanced steer-by-wire machine control is the hallmark of the Ammann ARP 75 Pivot-Steer Roller. The precise machine control includes machine fingertip steering (FTS) and an advanced drive lever with intelligent functions. A 10-inch multifunctional touchable display also establishes a new market standard. Newly designed front and rear water tanks for the sprinkling system hold volumes of water that are among the highest on the market – minimising refills during asphalt compaction.
Biofuel Use
Ammann diesel-burning machines are able to utilise hydrotreated vegetable oil (HVO), a biofuel made from waste that reduces CO2 emissions by up to 90%.
-
Highlights
-
Specifications
-
Options
PRODUCTIVITY
Pivot steering with split drums
Enables high manoeuvrability and reduces surface shear forces. A wide range of working widths provide productivity.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings
Enables high manoeuvrability and reduces surface shear forces. A wide range of working widths provide productivity.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings
ERGONOMICS
Advanced machine controls
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
Uninhibited visibility
Excellent all-around machine visibility for jobsite safety
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
Uninhibited visibility
Excellent all-around machine visibility for jobsite safety
SERVICEABILITY
ECOdrop
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems
| ARP 75 PIVOT-STEER TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final) | |
|---|---|
| DIMENSIONS | |
| A = MACHINE LENGTH | 4100 mm |
| B = WHEELBASE | 3000 mm |
| C = MACHINE HEIGHT | 3000 mm |
| E = DRUM WIDTH | 1500 mm |
| F = MACHINE WIDTH | 1670 mm |
| G = CURB CLEARANCE | 715 mm |
| H = GROUND CLEARANCE | 240 mm |
| I = DRUM DIAMETER | 1100 mm |
| J = DRUM THICKNESS | 18 mm |
| WEIGHT & DRIVING CHARACTERISTIC | |
| OPERATING WEIGHT CECE | 7375 kg |
| STAT. LIN. LOAD | 24.6 kg |
| TRAVEL SPEED | 10 km/h |
| OSCILLATION ANGLE | ± 6° |
| STEERING ANGLE | ± 24° |
| TURNING RADIUS, INNER (EDGE) | 2938 mm |
| DRUM OFFSET | 1220 mm |
| ENGINE | |
| MANUFACTURER | Kubota V3307-CR-T |
| POWER OUTPUT ISO 14396 | 54.4 kW (74 HP) |
| EMISSION CLASS | EU Stage V, U.S. EPA Tier 4 Final |
| EXHAUST GAS AFTER-TREATMENT | EGR+DOC+DPF |
| COMPACTION FORCES | |
| FREQUENCY I | 38-48 Hz |
| FREQUENCY II | 45-55 Hz |
| AMPLITUDE I | 0,68 mm |
| AMPLITUDE II | 0,39 mm |
| CENTRIFUGAL FORCE I | 58-92 kN |
| CENTRIFUGAL FORCE II | 47-70 kN |
| MISCELLANEOUS | |
| FUEL TANK CAPACITY | 180 liters |
| WATER TANK CAPACITY | 900 liters |
| MAXIMUM RECOMMENDED COMPACTED LIFT THICKNESS AT OPTIMAL WORKING CONDITIONS | |
| ROCKFILL | N/A |
| SAND / GRAVEL | 350 mm |
| MIXED SOILS | 250 mm |
| SILT | N/A |
| CLAY | N/A |
| STABILISATION | 180 mm |
| ASPHALT | 40-130 mm |
STANDARD
- CE conformity
- Cab version with integrated ROPS
- Working lights on cab
- 10” multi-control display with on-board diagnostics
- 270° rotatable & slideable seat
- FTS (Finger Tip Steering)
- 2 smooth drums, multiple frequencies/ 2 amplitude vibratory system
- Ammann color scheme
- Tiltable scrapers
- Central draining points
- Test ports on hydro-components
OPTIONAL EQUIPMENT
- Customer color scheme
- Split double drums (Front ACEpro)
- Split combi drums (Front ACEpro)
- Biodegradable hydraulic oil
- Additional Lights 360° LED
- Additional Lights 360° LED for Combi
- A/C
- A/C without Cooling Medium
- Radio Preparation
- Radio
- Sun Films on Cabin Glasses
- Sun Visor
- Warning Beacon LED
- Warning Beacon Green LED
- Back-up Alarm
- Back-up Alarm Adaptive
- Edge Cutter 45° (Front Right)
- Edge Cutter 45° (Diagonal)
- Edge Cutter 45° (Rear left)
- Chip Spreader Preparation
- Chip Spreader
- Infrared Thermometer
- Compaction Measuring System ACEforce
- Telematics Preparation
- Telematics Topcon
- Telematics Trackunit
- Telematics ServiceLink
- GPS Q-Compaction Preparation
- GPS Q-Compaction Preparation ACE
- GPS Q-Compaction ACE
- ADS (Ammann Documentation System)
- ADS (Ammann Documentation System RTK
- Rear View Camera
- Rear View Camera for Chip Spreader
- ROPS 2D
- Water Tank Filling from Ground
- Slow Moving Vehicle Triangle
- Toolset
- Fire Extinguisher
- Cooling Box
- Seat Belt 3”
- Maintenance Kit 500h
- Maintenance Kit 1000h
- Maintenance Kit 2000h
- Engine Automatic Stop
- Steering Control
- Battery Disconnection Switch
- Registration Plate Holder
- Container Shipment Preparation
- Certificate of Origin
- Additional Printed Documentation
- Additional Lights Cabin LED
