ARP 95C

  • Photos

  • Videos

  • Virtual Tour

The ARP 95 Pivot-Steer Roller features the widest working width of any comparable compactor on the market – and offers considerable fuel savings, too.

The redesigned machine frame enables the drums to be offset 1390 mm (4.6 ft.) on each side, compared with the previous version’s 1350 mm (4.4 ft.). The result is compaction width capability of 3070 mm (10 ft.), making the ARP 95 the market leader.

Reduced fuel expenses are another key benefit. The compactor is powered by a Deutz EU Stage V / US EPA Tier 4 Final engine, featuring improved software and other efficiencies that lower fuel costs as much as 25 per cent when compared with the previous generation.

  • Highlights

  • Specifications

  • Options

Open All

PRODUCTIVITY

  • Pivot steering with split drums for optimum manoeuvrability
  • A standard differential lock for improved traction on difficult jobsites and easier machine loading
  • A variable range of vibration frequencies for added versatility
  • ACEpro/ACEforce Intelligent Compaction tools to help eliminate unnecessary passes of the roller

ERGONOMICS

  • A spacious cab with low sound levels and 270° rotating seat for all-day operator comfort
  • A multifunctional display for intuitive machine control and operation, helping even inexperienced operators be safe and productive
  • Optimum all-around machine visibility for comfort and safety

SERVICEABILITY

  • A tiltable cab that provides easy access to service points and the engine compartment
  • Large engine doors, accessible from ground level, facilitate maintenance operations minimising machine downtime
  • ECOdrop feature – machine efficiency and reductions in fuel consumption and required fluids

DIMENSIONS
A = MACHINE LENGTH 4520 mm (178 in)
B = WHEELBASE 3300 mm (129.9 in)
C = MACHINE HEIGHT 3000 mm (118.1 in)
E = DRUM WIDTH 1680 mm (66.1 in)
E = PNEU WIDTH 1610 mm (63.4 in)
       MAX WORKING OFFSET MODE 3035 mm (119.5 in)
F = MACHINE WIDTH 1810 mm (71.3 in)
H = GROUND CLEARANCE 280 mm (11 in)
I = DRUM DIAMETER 1220 mm (48 in)
J = DRUM SHELL THICKNESS 17 mm (0.7 in)

 

WEIGHT & OPERATING CHARACTERISTICS ARP 95C ARP 95C (ACEpro)
OPERATING WEIGHT 9250 kg (20 390 Ib) 9290 kg (20 480 Ib)
MAXIMUM WEIGHT 10 940 kg (24 120 Ib) 10 980 kg (24 210 Ib)
STAT. LIN. LOAD OF FRONT DRUM 28.5 kg/cm (159.3 lb/in) 28.6 kg/cm (160.2 lb/in)
MAX. TRANSPORT SPEED 10 km/h (6.21 MPH) 10 km/h (6.21 MPH)
CLIMBING ABILITY / WITHOUT VIB. 25 / 30 % 25 / 30 %
TURNING RADIUS IN. (EDGE) 3065 mm (120.7 in) 3065 mm (120.7 in)
TURNING RADIUS OUT. (CONTOUR) 4785 mm (188.4 in) 4785 mm (188.4 in)
STEERING / OSCILLATION ANGLE ±25° / ±6° ±25° / ±6°

 

ENGINE
MANUFACTURER Deutz TCD3.6 L4
POWER ACCORDING TO ISO 14396 74.4 kW (100 HP)
NOMINAL SPEED 2200 min-1 (RPM)
EU Stage V / US EPA Tier 4 Final

 

COMPACTION FORCES ARP 95C ARP 95C (ACEpro)
FREQUENCY I *42 Hz (2520 VPM)
FREQUENCY II *52 Hz (3120 VPM)
FREQUENCY ACEpro MIN. 37 Hz (2220 VPM)
FREQUENCY ACEpro MAX. 52 Hz (3120 VPM)
AMPLITUDE I *0.65 mm (0.026 in)
AMPLITUDE II *0.28 mm (0.01 in)
AMPLITUDE ACEpro MAX. 0.85 mm (0.033 in)
CENTRIFUGAL FORCE I *91 kN (20 457.6 lbf)
CENTRIFUGAL FORCE II *60 kN (13 488.5 lbf)
CENTRIF. FORCE ACEpro MAX. 110 kN (24 729 lbf)
* Standard & Aceforce drum

 

MISCELLANEOUS
DRUM OFFSET 1355 mm (53.4 in)
BRAKES OPERATING Hydrostatic
BRAKES PARKING Mechanical multiple-disc
BRAKES EMERGENCY Mechanical multiple-disc
SIZE OF TYRES 11.00×20.00 16PR
FUEL TANK CAPACITY 165 l (43.6 gal)
DEF (ADBLUE) TANK 10 l (2.6 gal)
WATER TANK CAPACITY 800 l (211.3 gal)
VOLTAGE 24 V

STANDARD EQUIPMENT

  • CE conformity
  • Cabin, ventilated and heated
  • Rotating and sliding working station with multifunctional display
  • One split drum
  • Two stage vibration system (2 frequencies / 2 amplitudes)
  • Working lights 2 front, 2 rear
  • Smooth drum with vulcolan scrapers
  • Inter-axle differential lock
  • Electronic idle control
  • Pneu-tire axle with emulsion sprinkling and thermal aprons

OPTIONAL EQUIPMENT

  • Air conditioning
  • Ammann chip spreader
  • Universal preparation for multiple chip spreaders
  • Edge-cutter (one or two)
  • 360° illumination kit (for machine´s surroundings and engine compartments)
  • ACE pro Intelligent Compaction system with measuring (absolute values), automatic regulation of compaction performance (frequency and amplitude) and ADS documentation system
  • ACEforce compaction measurement (absolute values) and ADS documentation system
  • GPS mapping for ACE systems

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close