ARX 90C

  • Photos

  • Videos

The Ammann ARX 90C Tandem Roller provides features and benefits that ultimately lead to added value for owners of the heavy compactor.

A single-drive pump makes for easy service and maintenance. The cab’s design provides comfort that helps the operator stay focused and productive throughout the shift.

A differential lock is standard, while the optional ACEforce system provides a host of benefits including measurement and documentation, evaluation of material stiffness, operator guidance.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • Heavy-duty, 2-stage vibrator
  • Simple adjustment of amplitude/frequency
  • Combination version
  • Chip spreader for project flexibility
  • Single-drive pump
  • Differential lock
  • Articulated steering
  • Articulating oscillation joint
  • Spacious, comfortable and quiet cab
  • Excellent visibility to drum surfaces, edges and spraying bars
  • Rotating and sliding seat
  • Multifunctional display in steering wheel
  • Tiltable and adjustable steering column
  • Control switches on armrest
  • On-board diagnostics
  • Easy access to all service points

ARX 90C ARTICULATED TANDEM ROLLER (EU Stage IV / U.S. EPA Tier 4f)
DIMENSIONS
A = MACHINE LENGTH 4720 mm
B = WHEELBASE 3500 mm
C = MACHINE HEIGHT 3000 mm
E = DRUM WIDTH 1680 mm
F = MACHINE WIDTH 1800 mm
H = GROUND CLEARANCE 300 mm
I = DRUM DIAMETER 1220 mm
J = DRUM SHELL THICKNESS 19 mm

 

MISCELLANEOUS
BRAKES OPERATING Hydrostatic
BRAKES PARKING Mechanical multiple-disc
BRAKES EMERGENCY Mechanical multiple-disc
FUEL TANK CAPACITY 220 l
VOLTAGE 24 V

 

WEIGHT & DRIVING CHARACTERISTIC
OPERATING WEIGHT 9410 kg
MAXIMUM WEIGHT 10 880 kg
STAT. LIN. LOAD OF FRONT DRUM 28.4 kg/cm
MAX. TRANSPORT SPEED 10.5 km/h
CLIMBING ABILITY WITHOUT / WITH VIBRATION 30 % / 25 %
TURNING RADIUS INNER (EDGE) 5470 mm
CRAB MODE 170 mm

 

COMPACTION FORCES
FREQUENCY I 42 Hz
FREQUENCY II 52 Hz
AMPLITUDE I 0.7 mm
AMPLITUDE II 0.34 mm
CENTRIFUGAL FORCE I 84 kN
CENTRIFUGAL FORCE II 68 kN

 

ENGINE
MANUFACTURER Deutz TCD3.6 L4
POWER ACCORDING TO ISO 14396 74.4 kW (100 HP)
MAXIMUM TORQUE 410/1600 Nm/rpm
ENGINE COMPLIES WITH EMISSION REGULATIONS EU Stage IV / U.S. EPA Tier 4f

Standard Equipment

  • CE conformity
  • Open platform with ROPS canopy
  • 170° rotating and sliding working station with multifunctional display
  • Two stage vibration system (2 frequencies / 2 amplitudes)
  • Working lights 2 front, 2 rear
  • Electronic idle control
  • Pneu-tire axle with emulsion sprinkling and thermal aprons

Optional Equipment

  • Ventilated and heated Cab
  • Air Condition
  • ACEforce compaction measurement (absolute values) and ADS documentation system
  • GPS mapping for ACE systems
  • Telematics-ready
  • Chip spreader Ammann
  • Edge cutter