ARP 75

  • Photos

  • Virtual Tour

PUNCH AND PRECISION

Advanced steer-by-wire machine control is the hallmark of the Ammann ARP 75 Pivot-Steer Roller. The precise machine control includes machine fingertip steering (FTS) and an advanced drive lever with intelligent functions. A 10-inch multifunctional touchable display also establishes a new market standard. Newly designed front and rear water tanks for the sprinkling system hold volumes of water that are among the highest on the market – minimising refills during asphalt compaction.

  • Highlights

  • Specifications

  • Options

Open All

PRODUCTIVITY

Pivot steering with split drums
Enables high manoeuvrability and reduces surface shear forces. A wide range of working widths provide productivity.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings

ERGONOMICS

Advanced machine controls
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
Uninhibited visibility
Excellent all-around machine visibility for jobsite safety

SERVICEABILITY

ECOdrop
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems

ARP 75 PIVOT-STEER TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final)
DIMENSIONS
A = MACHINE LENGTH 4100 mm (161,4 in)
B = WHEELBASE 3000 mm (118.1 in)
C = MACHINE HEIGHT 3000 mm (118.1 in)
E = DRUM WIDTH 1500 mm (59,1 in)
F = MACHINE WIDTH 1670 mm (65,7 in)
G = CURB CLEARANCE 715 mm (28,1 in)
H = GROUND CLEARANCE 240 mm (9,4 in)
I = DRUM DIAMETER 1100 mm (43,3 in)
J = DRUM THICKNESS 18 mm (0,7 in)
WEIGHT & DRIVING CHARACTERISTIC
OPERATING WEIGHT CECE 7375 kg (16 259 lb)
STAT. LIN. LOAD 24.6 kg (54.23 lb)
TRAVEL SPEED 10 km/h (6.21 miles/h)
OSCILLATION ANGLE ± 6°
STEERING ANGLE ± 24°
TURNING RADIUS, INNER (EDGE) 2938 mm (115.7 in)
DRUM OFFSET 1220 mm (48 in)
ENGINE
MANUFACTURER Kubota V3307-CR-T
POWER OUTPUT ISO 14396 54.4 kW (74 HP)
EMISSION CLASS EU Stage V, U.S. EPA Tier 4 Final
EXHAUST GAS AFTER-TREATMENT EGR+DOC+DPF
COMPACTION FORCES
FREQUENCY I 38-48 Hz (2280-2880 VPM)
FREQUENCY II 45-55 Hz (2700-3300 VPM)
AMPLITUDE I 0,68 mm (0,03 in)
AMPLITUDE II 0,39 mm (0,02 in)
CENTRIFUGAL FORCE I 58-92 kN (13 038,92 – 20 682,42 lbf)
CENTRIFUGAL FORCE II 47-70 kN (10 566,02 – 15 736,63 lbf)
MISCELLANEOUS
FUEL TANK CAPACITY 180 liters (47,5 gallons)
WATER TANK CAPACITY 900 liters (237,75 gallons)
STANDARD
  • CE conformity
  • Cab version with integrated ROPS
  • Working lights on cab
  • 10” multi-control display with on-board diagnostics
  • 270° rotatable & slideable seat
  • FTS (Finger Tip Steering)
  • 2 smooth drums, multiple frequencies/ 2 amplitude vibratory system
  • Ammann color scheme
  • Tiltable scrapers
  • Central draining points
  • Test ports on hydro-components

 

OPTIONAL EQUIPMENT
  • Customer color scheme
  • Split double drums (Front ACEpro)
  • Split combi drums (Front ACEpro)
  • Biodegradable hydraulic oil
  • Additional Lights 360° LED
  • Additional Lights 360° LED for Combi
  • A/C
  • A/C without Cooling Medium
  • Radio Preparation
  • Radio
  • Sun Films on Cabin Glasses
  • Sun Visor
  • Warning Beacon LED
  • Warning Beacon Green LED
  • Back-up Alarm
  • Back-up Alarm Adaptive
  • Edge Cutter 45° (Front Right)
  • Edge Cutter 45° (Diagonal)
  • Edge Cutter 45° (Rear left)
  • Chip Spreader Preparation
  • Chip Spreader
  • Infrared Thermometer
  • Compaction Measuring System ACEforce
  • Telematics Preparation
  • Telematics Topcon
  • Telematics Trackunit
  • Telematics ServiceLink
  • GPS Q-Compaction Preparation
  • GPS Q-Compaction Preparation ACE
  • GPS Q-Compaction ACE
  • ADS (Ammann Documentation System)
  • ADS (Ammann Documentation System RTK
  • Rear View Camera
  • Rear View Camera for Chip Spreader
  • ROPS 2D
  • Water Tank Filling from Ground
  • Slow Moving Vehicle Triangle
  • Toolset
  • Fire Extinguisher
  • Cooling Box
  • Seat Belt 3”
  • Maintenance Kit 500h
  • Maintenance Kit 1000h
  • Maintenance Kit 2000h
  • Engine Automatic Stop
  • Steering Control
  • Battery Disconnection Switch
  • Registration Plate Holder
  • Container Shipment Preparation
  • Certificate of Origin
  • Additional Printed Documentation
  • Additional Lights Cabin LED