APH 60/85

  • Photos

  • Videos

Trusted and reliable

Weighing in at 464 kg, the APH 60/85 features a twin-shaft exciter system with the efficient and powerful compaction it brings. The machine is highly reliable and trusted in the marketplace because of its robust design and long component life. The plates can be operated easily and comfortably, even in tight areas, and work well around obstacles such as columns and in cohesive materials. The machine also is smooth when changing directions.

  • Highlights

  • Specifications

  • Technology

Open All

Low Hand-Arm-Vibration Values (HAV) to the Operator

The standard hand guide for APH plates is isolated to minimise hand-arm vibration. Levels lower than 2.5 m/s² (excluding APH 100-20) enable operators to work longer shifts with the best comfort. The vibration levels are so low that safety codes do not require documentation of operator hours.

Ammann Orbitrol Steering

Ammann Orbitrol steering controls the adjustment of the centrifugal weights, allowing a smooth and easy change of direction while ensuring great accuracy on the jobsite. Machine speed and direction can be adjusted by a simple turn of the steering control lever. The machine also can hover and provide on-the-spot compaction for the more challenging areas. This system also helps improve productivity in corners and other tight spots.

Fully Hydrostatic Drive

A fully hydrostatic drive system eliminates the need for a V belt and a centrifugal clutch – and the maintenance that go with them. A hydraulic motor drives the eccentric shafts.

ACE Compaction Expert – Big technology in a Small Package

APH Hydrostatic Vibratory Plates can be equipped with the industry-proven Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the same technology that has been used on Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved.
Weights & Dimensions Metric US
Machine weight basic unit 464 kg 464 kg  (1023 lb)
A Base plate length 470 mm 470 mm (18.5 in)
B Machine length 930 mm 930 mm (36.6 in)
C    with handle 1840 mm 1840 mm (72.4 in)
D Machine heigth 905 mm 905 mm (35.6 in)
E Handle height (work) 1000 mm 1000 mm (39.4 in)
F Handle height (transport) 1500 mm 1500 mm (59.1 in)
G Machine width 700/850 mm 700/850 mm
(27.6/33.5 in)
Engine
Engine Hatz Supra 1D81S Hatz Supra 1D81S
Fuel Diesel Diesel
Engine Output 13.4 HP / 10 kW 13.4 HP / 10 kW
    at RPM 3000 rpm 3000 rpm
Fuel consumption 2.5 l/h 2.5 l/h (0.66 gal/h)
Compaction Forces
Max. Vibration frequency 69 Hz 69 Hz (4140 vpm)
Max. Centrifugal force 60 kN 60 kN (13488 lbf)
Working surface basic unit 1428 m²/h 1428 m²/h (15371 ft²/h)
Max Surface Pressure 18.24 N/cm² 18.24 N/cm²
Miscellaneous
Operating Speed 28 m/min 28 m/min (1.04 mph)
Tank capacity 7 l 7 l  (1.8 gal)
Gradeability 36% 36%
Max. incline to all sides 30° 30°
Options
Extension Plates 75 mm / 150 mm 75 mm / 150 mm (3 in / 5.9 in)
Operation hour meter x x
Electric starter x x
Emergency stop x x
ACE econ x x
ACE force
Working lights

This machine is equipped with ServiceLink.

READ MORE

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close