-
Photos
-
Virtual Tour
CONTROL AT YOUR FINGERTIPS
This is a heavy machine, with a robust vibratory system, too. Ammann makes it easy on operators by integrating fingertip steering (FTS). Its steer-by-wire replaces the traditional steering wheel and allows operators to keep both hands on the armrests for improved comfort.
The symmetrical cab integrates four ROPS posts directly in the main structure and close to doors, not in the cab corners. ROPs posts have been relocated to provide 360º visibility, and sustainability is improved (and ownership costs reduced) through Ammann’s ECOdrop initiative. Crab mode, an option, enables work with off-set drums for improved productivity and compaction close to obstructions.
Biofuel Use
Ammann diesel-burning machines are able to utilise hydrotreated vegetable oil (HVO), a biofuel made from waste that reduces CO2 emissions by up to 90%.
-
Highlights
-
Specifications
-
Options
PRODUCTIVITY
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings
Machine customisation
Options make the machine a perfect match for diverse jobsites and varying customer needs
Varied vibratory settings increase or decrease compaction output for even more precise compaction control and higher quality.
Sprinkling system
3-stage filtration system with large water tank for extended intervals between fillings
Machine customisation
Options make the machine a perfect match for diverse jobsites and varying customer needs
ERGONOMICS
Advanced machine controls
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
No limits in visibility
Excellent all-around machine visibility for safety on the jobsite
Ergonomic steering system makes the machine operator-friendly and easy to control
Operator station
An intuitively organized, fully adjustable operator station has all controls located within easy reach
No limits in visibility
Excellent all-around machine visibility for safety on the jobsite
SERVICEABILITY
ECOdrop
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems
Smart machine functions and new technologies improve efficiency and reduce fuel consumption and the amount of required fluids.
Maintenance-friendly design
Tool-free, wide-opening side doors provide access to the engine compartments and service points
Self-diagnostic system
The on-board, automated diagnostic system quickly identifies potential problems
| ARX 140 ARTICULATED TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final) | |
|---|---|
| DIMENSIONS | |
| A = MACHINE LENGTH | 5150 mm |
| B = WHEELBASE | 3750 mm |
| C = MACHINE HEIGHT | 3000 mm |
| E = DRUM WIDTH | 2130 mm |
| F = MACHINE WIDTH | 2260 mm |
| G = CURB CLEARANCE | 990 mm |
| H = GROUND CLEARANCE | 325 mm |
| I = DRUM DIAMETER | 1400 mm |
| J = DRUM THICKNESS | 19 mm |
| WEIGHT & DRIVING CHARACTERISTIC | ||
|---|---|---|
| ARX 140 | ARX 140 HF | |
| OPERATING WEIGHT CECE | 13 300 kg | 13 300 kg |
| STAT. LIN. LOAD | 62,4 kg | 62,4 kg |
| TRAVEL SPEED | 12 km/h | 12 km/h |
| OSCILLATION ANGLE | ± 6° | ± 6° |
| STEERING ANGLE | ± 33° | ± 33° |
| TURNING RADIUS, INNER (EDGE) | 5225 mm | 5225 mm |
| DRUM OFFSET | 170 mm | 170 mm |
| ENGINE | |
|---|---|
| MANUFACTURER | Perkins 904J |
| POWER OUTPUT ISO 14396 | 100 kW (134 HP) |
| EMISSION CLASS | EU Stage V / U.S. EPA Tier 4 Final |
| EXHAUST GAS AFTER-TREATMENT | EGR+DOC+DPF+SCR |
| COMPACTION FORCES | ||
|---|---|---|
| ARX 140 | ARX 140 HF | |
| FREQUENCY I | 35-40 Hz | 38-48 Hz |
| FREQUENCY II | 40-50 Hz | 52-62 Hz |
| AMPLITUDE I | 0,82 mm | 0,58 mm |
| AMPLITUDE II | 0,37 mm | 0,24 mm |
| CENTRIFUGAL FORCE I | 104-136 kN | 86-137 kN |
| CENTRIFUGAL FORCE II | 61-96 kN | 67-95 kN |
| MISCELLANEOUS | |
|---|---|
| FUEL TANK CAPACITY | 180 liters |
| WATER TANK CAPACITY | 1010 liters |
| VOLTAGE | 12 V |
| MAXIMUM RECOMMENDED COMPACTED LIFT THICKNESS AT OPTIMAL WORKING CONDITIONS | |
| ROCKFILL | N/A |
| SAND / GRAVEL | 450 mm |
| MIXED SOILS | 350 mm |
| SILT | N/A |
| CLAY | N/A |
| STABILISATION | 250 mm |
| ASPHALT | 40-160 mm |
STANDARD
- CE conformity
- Open platform with ROPS
- Working lights on platform/cab
- 10” multi-control display with on-board diagnostics
- 270° rotatable & slideable seat
- FTS (Finger Tip Steering)
- 2 smooth drums, multiple frequencies/ 2 amplitude vibratory system
- Ammann color scheme
- Tiltable scrapers
- Central draining points
- Test ports on hydro-components
OPTIONAL EQUIPMENT
- Color scheme customer
- Drums double unsplitted HF
- Cab with ROPS
- A/C
- A/C without cooling medium
- Radio preparation
- Radio
- Sun films on cab glasses
- Crab mode
- Hydraulic oil biodegradable
- Road lights
- Additional lights 360° LED
- Warning beacon LED
- Warning beacon green LED
- Back-up alarm
- Back-up alarm adaptive
- Registration plate holder
- Edge cutter 45° (front right)
- Edge cutter 45° (front right/front left)
- Edge cutter 45° (diagonal)
- Chip spreader
- Seat belt 3”
- Infrared thermometer
- Compaction measuring system ACEforce
- Telematics preparation
- Telematics Topcon
- Telematics trackunit
- Telematics ServiceLink
- GPS Q-compaction preparation
- GPS Q-compaction preparation ACE
- GPS Q-compaction ACE
- ADS (Ammann Documentation System)
- ADS (Ammann Documentation System) RTK
- Rear view camera
- ROPS 2D
- Safety cover
- Sprinkling system second antifreeze pump
- Water tank filling from ground
- Slow moving vehicle triangle
- Toolset
- Fire extinguisher
- Maintenance kit 500h
- Maintenance kit 1000h
- Maintenance kit 2000h
- Engine automatic stop
- CE conformity
- Italokit
- Steering control
- Battery disconnection switch
- Container shipment preparation
- Sun visor
- Cooling box
- Certificate of origin
- Additional documentation printed
- Drawbar
