The ARP 95 Pivot-Steer Roller features the widest working width of any comparable compactor on the market – and offers considerable fuel savings, too.
The redesigned machine frame enables the drums to be offset 1390 mm (4.6 ft.) on each side, compared with the previous version’s 1350 mm (4.4 ft.). The result is compaction width capability of 3070 mm (10 ft.), making the ARP 95 the market leader.
Reduced fuel expenses are another key benefit. The compactor is powered by a Deutz EU Stage V / US EPA Tier 4 Final engine, featuring improved software and other efficiencies that lower fuel costs as much as 25 per cent when compared with the previous generation.
|Pivot steering with split drums
Enables higher manoeuvrability on jobsites and reduces surface shear forces.
Ammann Traction Control
Increases machine traction on difficult jobsites and makes machine loading easier.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for precise compaction control and higher quality.
|Fingertip steering (FTP)
Ergonomic steering system makes the machine operator-friendly and easy to control.
Central display is located in front of the operator for optimal machine control and monitoring.
Exceptional operator visibility
Perfect all-around machine visibility to maximise safety on the jobsite.
|Tiltable cab and wide engine doors
Exceptional accesibility to all major components and service points.
High focus on easy maintenance and robust design to minimise downtime.
Ground access to service and maintenance points
Fast and easy machine servicing; no additional tools required.
|ARP 95C PIVOT-STEER TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final)|
|A = MACHINE LENGTH||4520 mm (178 in)|
|B = WHEELBASE||3300 mm (129.9 in)|
|C = MACHINE HEIGHT||3000 mm (118.1 in)|
|E = DRUM WIDTH||1680 mm (66.1 in)|
|E = PNEU WIDTH||1610 mm (63.4 in)|
|MAX WORKING OFFSET MODE||3035 mm (119.5 in)|
|F = MACHINE WIDTH||1810 mm (71.3 in)|
|H = GROUND CLEARANCE||280 mm (11 in)|
|I = DRUM DIAMETER||1220 mm (48 in)|
|J = DRUM SHELL THICKNESS||17 mm (0.7 in)|
|WEIGHT & OPERATING CHARACTERISTICS|
|ARP 95C||ARP 95C (ACEpro)|
|OPERATING WEIGHT||9250 kg (20 390 Ib)||9290 kg (20 480 Ib)|
|MAXIMUM WEIGHT||10 940 kg (24 120 Ib)||10 980 kg (24 210 Ib)|
|STAT. LIN. LOAD OF FRONT DRUM||28.5 kg/cm (159.3 lb/in)||28.6 kg/cm (160.2 lb/in)|
|MAX. TRANSPORT SPEED||10 km/h (6.21 MPH)||10 km/h (6.21 MPH)|
|CLIMBING ABILITY / WITHOUT VIB.||25 / 30 %||25 / 30 %|
|TURNING RADIUS IN. (EDGE)||3065 mm (120.7 in)||3065 mm (120.7 in)|
|TURNING RADIUS OUT. (CONTOUR)||4785 mm (188.4 in)||4785 mm (188.4 in)|
|STEERING / OSCILLATION ANGLE||±25° / ±6°||±25° / ±6°|
|MANUFACTURER||Deutz TCD3.6 L4|
|POWER ACCORDING TO ISO 14396||74.4 kW (100 HP)|
|NOMINAL SPEED||2200 min-1 (RPM)|
|EXHAUST GAS AFTER-TREATMENT||EGR+DOC+DPF+SCR|
|EU Stage V / U.S. EPA Tier 4 Final|
|ARP 95C||ARP 95C (ACEpro)|
|FREQUENCY I||*38–42 Hz (2280–2520 VPM)||–|
|FREQUENCY II||*42–52 Hz (2520–3120 VPM)||–|
|FREQUENCY ACEpro MIN.||–||37 Hz (2220 VPM)|
|FREQUENCY ACEpro MAX.||–||52 Hz (3120 VPM)|
|AMPLITUDE I||*0.65 mm (0.026 in)||–|
|AMPLITUDE II||*0.28 mm (0.01 in)||–|
|AMPLITUDE ACEpro MAX.||–||0.85 mm (0.033 in)|
|CENTRIFUGAL FORCE I||*74–91 kN (16636-20 457.6 lbf)||–|
|CENTRIFUGAL FORCE II||*36–60 kN (13 488.5 lbf)||–|
|CENTRIF. FORCE ACEpro MAX.||–||110 kN (24 729 lbf)|
|DRUM OFFSET||1355 mm (53.4 in)|
|BRAKES PARKING||Mechanical multiple-disc|
|BRAKES EMERGENCY||Mechanical multiple-disc|
|SIZE OF TYRES||11,00×20,00 16PR|
|FUEL TANK CAPACITY||165 l (43.6 gal)|
|DEF (ADBLUE) TANK||10 l (2.6 gal)|
|WATER TANK CAPACITY||800 l (211.3 gal)|
* Standard & ACEforce drum
- CE conformity
- Cabin, ventilated and heated
- Rotating and sliding working station with multifunctional display
- One split drum
- Two stage vibration system (2 frequencies / 2 amplitudes)
- Working lights 2 front, 2 rear
- Smooth drum with vulcolan scrapers
- Inter-axle differential lock
- Electronic idle control
- Pneu-tire axle with emulsion sprinkling and thermal aprons
- Air conditioning
- Ammann chip spreader
- Universal preparation for multiple chip spreaders
- Edge-cutter (one or two)
- 360° illumination kit (for machine´s surroundings and engine compartments)
- GPS mapping for ACE systems
- ACEpro Intelligent Compaction system with measuring (absolute values), automatic regulation of compaction performance frequency and amplitude) and ADS documentation system
- ACEforce compaction measurement (absolute values) and ADS documentation system