The ARP 95 Pivot-Steer Roller features the widest working width of any comparable compactor on the market – and offers considerable fuel savings, too.
The redesigned machine frame enables the drums to be offset 1390 mm (4.6 ft.) on each side, compared with the previous version’s 1350 mm (4.4 ft.). The result is compaction width capability of 3070 mm (10 ft.), making the ARP 95 the market leader.
Reduced fuel expenses are another key benefit. The compactor is powered by a Deutz EU Stage V / US EPA Tier 4 Final engine, featuring improved software and other efficiencies that lower fuel costs as much as 25 per cent when compared with the previous generation.
|Pivot steering with split drums
Enables higher manoeuvrability on jobsites and reduces surface shear forces.
Ammann Traction Control
Increases machine traction on difficult jobsites and makes machine loading easier.
Multiple vibration frequencies
Varied vibratory settings increase or decrease compaction output for precise compaction control and higher quality.
|Fingertip steering (FTP)
Ergonomic steering system makes the machine operator-friendly and easy to control.
Central display is located in front of the operator for optimal machine control and monitoring.
Exceptional operator visibility
Perfect all-around machine visibility to maximise safety on the jobsite.
|Tiltable cab and wide engine doors
Exceptional accesibility to all major components and service points.
High focus on easy maintenance and robust design to minimise downtime.
Ground access to service and maintenance points
Fast and easy machine servicing; no additional tools required.
|ARP 95 PIVOT-STEER TANDEM ROLLER (EU Stage V / U.S. EPA Tier 4 Final)|
|A = MACHINE LENGTH||4520 mm (178 in)|
|B = WHEELBASE||3300 mm (129.9 in)|
|C = MACHINE HEIGHT||3000 mm (118.1 in)|
|E = DRUM WIDTH||1680 mm (66.1 in)|
|MAX WORKING OFFSET MODE||3070 mm (120.8 in)|
|F = MACHINE WIDTH||1810 mm (71.3 in)|
|H = GROUND CLEARANCE||280 mm (11 in)|
|I = DRUM DIAMETER||1220 mm (48 in)|
|J = DRUM SHELL THICKNESS||17 mm (0.7 in)|
|WEIGHT & OPERATING CHARACTERISTICS|
|ARP 95||ARP 95 (ACEpro)|
|OPERATING WEIGHT||9700 kg (21 380 Ib)||9740 kg (21 470 Ib)|
|MAXIMUM WEIGHT||11 370 kg (25 070 Ib)||11 410 kg (25 150 Ib)|
|STAT. LIN. LOAD OF FRONT DRUM||28.6 kg/cm (160 lb/in)||28.8 kg/cm (161.3 lb/in)|
|STAT. LIN. LOAD OF REAR DRUM||29.2 kg/cm (163.3 lb/in)||29.2 kg/cm (163.3 lb/in)|
|MAX. TRANSPORT SPEED||10 km/h (6.21 MPH)||10 km/h (6.21 MPH)|
|CLIMBING ABILITY / WITHOUT VIB.||25 / 30 %||25 / 30 %|
|TURNING RADIUS IN. (EDGE)||3065 mm (120.7 in)||3065 mm (120.7 in)|
|TURNING RADIUS OUT. (CONTOUR)||4785 mm (188.4 in)||4785 mm (188.4 in)|
|STEERING / OSCILLATION ANGLE||±25° / ±6°||±25° / ±6°|
|MANUFACTURER||Deutz TCD3.6 L4|
|POWER ACCORDING TO ISO 14396||74.4 kW (100 HP)|
|NOMINAL SPEED||2200 min-1 (RPM)|
|EXHAUST GAS AFTER-TREATMENT||EGR+DOC+DPF+SCR|
|EU Stage V / U.S. EPA Tier 4 Final|
|ARP 95||ARP 95 (ACEpro)|
|FREQUENCY I||*38–42Hz (2280–2520 VPM)||42 Hz (2520 VPM)|
|FREQUENCY II||*42–52 Hz (2520–3120 VPM)||52 Hz (3120 VPM)|
|FREQUENCY ACEpro MIN.||–||37 Hz (2220 VPM)|
|FREQUENCY ACEpro MAX.||–||52 Hz (3120 VPM)|
|AMPLITUDE I||*0.65 mm (0.026 in)||0.65 mm (0.026 in)|
|AMPLITUDE II||*0.28 mm (0.01 in)||0.28 mm (0.01 in)|
|AMPLITUDE ACEpro MAX.||–||0.85 mm (0.033 in)|
|CENTRIFUGAL FORCE I||*74–91 kN (16636–20457 lbf)||91 kN (20 457.6 lbf)|
|CENTRIFUGAL FORCE II||*39–60 kN (8767–13488 lbf)||60 kN (13 488.5 lbf)|
|CENTRIF. FORCE ACEpro MAX.||–||110 kN (24 729 lbf)|
|DRUM OFFSET||1390 mm (54.7 in)|
|BRAKES PARKING||Mechanical multiple-disc|
|BRAKES EMERGENCY||Mechanical multiple-disc|
|FUEL TANK CAPACITY||165 l (43.6 gal)|
|DEF (ADBLUE) TANK||10 l (2.6 gal)|
|WATER TANK CAPACITY||800 l (211.3 gal)|
* Standard & ACEforce drum
- CE conformity
- Cabin, ventilated and heated
- Rotating and sliding working station with multifunctional display
- Two split drums
- Two stage vibration system (2 frequencies / 2 amplitudes)
- Working lights 2 front, 2 rear
- Smooth drum with vulcolan scrapers
- Inter-axle differential lock
- Electronic idle control
- Air conditioning
- Ammann chip spreader
- Universal preparation for multiple chip spreaders
- Edge-cutter (one or two)
- 360° illumination kit (for machine´s surroundings and engine compartments)
- GPS mapping for ACE systems
- ACEpro Intelligent Compaction system with measuring (absolute values), automatic regulation of compaction performance (frequency and amplitude) and ADS documentation system
- ACEforce compaction measurement (absolute values) and ADS documentation system